ARDUINO® UNO SMD REV.3
ARDUINO® UNO SMD REV.3
€23,90
In stock
In stock
SKU: ARD-A000073 Check our full Whadda product transition list Category: Development boards Skills: Coding Level 1, Electronics Level 1, Mechanics Level 1
Description
The Arduino Uno is a microcontroller board based on the ATmega328. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U programmed as a USB-to-serial converter.
Features
- digital I/O pins: 14 (of which 6 provide PWM output)
- analogue input pins: 6
- contains: 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button
Specifications
- Technical data:
- Operating voltage: 5 V
- Analog input pins: 6
- Built-in LED’s: 13
- Clock speed: 16 MHz
- DC current for 3.3 volt pins: 50 mA
- DC current per i/o pins: 20 mA
- EEPROM: 1 kB
- Flash memory: 32 kB
- Flash memory used by bootloader: 0.5 kB
- Maximum input voltage rating ( recommended ): 12 V
- Minimum input voltage rating ( recommended ): 7 V
- PWM digital i/o pins: 6
- PWM output pins: 6
- SRAM: 2 kB
- Microcontroller: ATmega328P
- Connections:
- Digital I/O pins: 14
- Power supply:
- Input voltage rating: 6-20 V
- Product basic info:
- Colour: Green
- Additional colour: Black
- Depth: 53.4 mm
- Width: 68.6 mm
- Weight: 25 g
- Material: Epoxy
Additional information
| Weight | 37 g |
|---|---|
| Dimensions | 2,50 × 6,00 × 8,20 cm |
| Soldering | none |
| Electronics | level 1 |
| Coding | level 1 |
| Mechanics | level 1 |
Downloads
| Infosheet resistor colour code |  | EN DE ES FR NL |
| Overview of Velleman modules that are equal to D.I.Y Kits This sheet is useful when you want to know which modules you could find in the do-it-yourself range of Velleman Kits and minikits. | | EN DE ES FR NL |
