BASIC DIY KIT WITH ATMEGA2560 FOR ARDUINO®

Description

This product is a replacement of: VMA502

Features

• 1 x
• 15 x LED (multiple colours)
• 8 x 220 Ohm resistor (RA220E0)
• 5 x 1K resistor (RA1K0)
• 5 x 10K resistor (RA10K0)
• 1 x 830 hole breadboard
• 4 x 4-pin key switch
• 1 x active buzzer
• 1 x passive buzzer
• 1 x infrared sensor diode
• 1 x LM35 temperature sensor (LM35DZ)
• 2 x ball tilt switch (similar to MERS4 & MERS5)
• 3 x photo sensitive transistor (SGPT5053C)
• 1 x single digit 7 segment LED display
• 30 x breadboard jumper wire
• 1 x USB cable

Specifications

• Technical data:
  • Specifications: Features <ul> <li>1 x</li> <li>15 x LED (multiple colours)</li> <li>8 x 220 Ohm resistor (RA220E0)</li> <li>5 x 1K resistor (RA1K0)</li> <li>5 x 10K resistor (RA10K0)</li> <li>1 x 830 hole breadboard</li> <li>4 x 4-pin key switch</li> <li>1 x active buzzer</li> <li>1 x passive buzzer</li> <li>1 x infrared sensor diode</li> <li>1 x LM35 temperature sensor (LM35DZ)</li> <li>2 x ball tilt switch (similar to MERS4 &amp; MERS5)</li> <li>3 x photo sensitive transistor (SGPT5053C)</li> <li>1 x single digit 7 segment LED display</li> <li>30 x breadboard jumper wire</li> <li>1 x USB cable</li> </ul>
• Operational properties:
  • Instruction manual languages: English
  • Coding skill level: 1
  • Electronics skill level: 2
  • Mechanics skill level: 1
  • Soldering skill level: none
• Product basic info:
  • Colour unit: Multicolour
  • Weight unit: 324 g