DIY STARTER KIT FOR ARDUINO®
DIY STARTER KIT FOR ARDUINO®
€39,95
In stock
In stock
Description
This product is a replacement of: VMA501
Features
- This basic kit includes: 1 x
- 15 x LED (multiple colours)
- 8 x 220 Ohm resistor (RA220E0)
- 5 x 1K resistor (RA1K0)
- 5 x 10K resistor (RA10K0)
- 1 x 830 hole breadboard
- 1 x RGB LED module (WPM318)
- 4 x 4-pin key switch
- 1 x active buzzer (WPM319)
- 1 x passive buzzer
- 1 x 1838 IR infrared 37.9 Khz receiver (WPI317)
- 1 x infrared remote control
- 1 x infrared sensor diode
- 1 x 18B20 temperature sensor
- 2 x ball tilt switch (similar to MERS4 & MERS5)
- 3 x photo sensitive transistor (SGPT5053C)
- 1 x 74HC595 shift register (HC595)
- 1 x battery holder for 6 AA batteries (similar to BH363B)
- 1 x 8*8 LED matrix display
- 1 x single digit 7 segment LED display
- 1 x 4 digit 7 segment LED display
- 30 x breadboard jumper wire
- 1 x USB cable
- 1 x potmeter 50K
Specifications
- Product basic info:
- Instruction manual languages: English
- Primary colours: Multicolour
- Weight unit: 265 g
- Technical data:
- Specifications kits & modules: <ul><li>This basic kit includes: 1 x</li> <li>15 x LED (multiple colours)</li> <li>8 x 220 Ohm resistor (RA220E0)</li> <li>5 x 1K resistor (RA1K0)</li> <li>5 x 10K resistor (RA10K0)</li> <li>1 x 830 hole breadboard</li> <li>1 x RGB LED module (WPM318)</li> <li>4 x 4-pin key switch</li> <li>1 x active buzzer (WPM319)</li> <li>1 x passive buzzer</li> <li>1 x 1838 IR infrared 37.9 Khz receiver (WPI317)</li> </ul>
- Specifications extra kits & modules: <ul><li>1 x infrared remote control</li><li>1 x infrared sensor diode</li><li>1 x 18B20 temperature sensor</li><li>2 x ball tilt switch (similar to MERS4 & MERS5)</li><li>3 x photo sensitive transistor (SGPT5053C)</li><li>1 x 74HC595 shift register (HC595)</li><li>1 x battery holder for 6 AA batteries (similar to BH363B)</li><li>1 x 8*8 LED matrix display</li><li>1 x single digit 7 segment LED display</li><li>1 x 4 digit 7 segment LED display</li><li>30 x breadboard jumper wire</li><li>1 x USB cable</li><li>1 x potmeter 50K</li></ul>
- Operational properties:
- Coding skill level: none
- Electronics skill level: none
- Mechanics skill level: none
- Soldering skill level: none
Additional information
Weight | 265 g |
---|---|
Dimensions | 6,00 × 18,00 × 15,50 cm |
Soldering | none |
Electronics | none |
Coding | none |
Mechanics | none |
Manuals
Manual
User manual EN | EN |