USB PC Oscilloscope and Signal Generator

189,00

In stock

Description

This product is a replacement of: WFS210’TEMP,WFS210

Features

  • function generator:
    • crystal-based stability
    • standard waveforms: sine, square and triangle
    • predefined library waveforms included: sine(x)/x, sweep, …
  • oscilloscope:
    • auto set-up function and X10 option
    • pre-trigger function
    • readouts: True RMS, dBV, dBm, p to p, Duty cycle, Frequency…
    • persistence options: colour graded, variable and infinite
  • transient recorder:
    • automatic storage of data
    • automatic recording for more than 1 year
    • record and display of screens
  • bode plotter:
    • automated sync between oscilloscope and generator
    • logarithmic scale option
    • Volt or dB display scale
    • phase plot option
  • spectrum analyser:
    • linear or logarithmic timescale
    • operating principle: FFT (Fast Fourier Transform)
    • FFT input channel: CH1 or CH2
    • zoom function
  • in the box:
    • getting started manual
    • USB PC Scope+generator unit
    • USB cable

Specifications

  • general:
    • markers for: amplitude/voltage and frequency/time
    • input coupling: DC, AC and GND
    • supply from USB port (500mA)
    • dimensions: 100 x 100 x 35mm / 3.9 x 3.9 x 1.4″
  • function generator:
    • amplitude range: 200mVpp to 8Vpp @ 1KHz// no load
    • vertical resolution: 8 bits
    • square wave rise/fall time: 0.3µs
    • sample rate: 25MHz
    • typical sine wave distortion (THD): < 1%
    • output impedance: 50ohm
    • frequency range: from 0.5Hz to 500KHz (sine 1MHz)
  • oscilloscope:
    • bandwidth: two channels DC to 12 MHz ±3dB
    • input impedance: 1 Mohm / 30pF
    • maximum input voltage: 30V (AC + DC)
    • time base: 0.1µs to 500ms per division
    • input range: 10mV to 3V/division
    • input sensitivity: 0.3mV display resolution
    • record length: 4K samples / channel
    • sampling frequency: 250Hz to 25MHz
  • transient recorder:
    • timescale: 20ms/Div to 2000s/Div
    • max. record time: 9.4hour/screen
    • max. number of samples: 100/s
    • min. number of samples: 1 sample/20s
  • bode Plotter:
    • voltage range: 10mV, 30mV, 0.1V, 0.3V, 1V, 3V
    • frequency range: 1KHz , 10KHz, 100KHz, 500KHz
    • Frequncy start: 1Hz,10Hz, 100Hz, 1KHz, 10KHz, 100KHz
  • spectrum analyser:
    • frequency range: 0 .. 120Hz to 12MHz
    • FFT resolution: 2048 lines
  • minimum system requirements:
    • IBM compatible PC
    • Windows™ XP, Vista, 7 *
    • SVGA display card (min.1024 x 768)
    • mouse
    • free USB port 1.1 or 2.0

Additional information

Weight 260 g
Dimensions 12.50 × 13.50 × 3.50 cm
Electronics

none

Soldering

none

Coding

none

Mechanics

none

Manuals

Manual

User manual
manual explaining the module’s possibilities and how to use the device
EN
DE
ES
FR
NL

Downloads

Download

PCLAB200 Software for PCSU200
Program, driver, and documentation for Windows XP/Vista/Windows 7/8/10. (Rev 1.07 – Released 16/02/2018)
EN
Software development kit (SDK)
with documentation and example programs written in VB and Delphi.

EN

Info Sheets

Datasheet
Product information about the USB PC Oscilloscope and Signal Generator
EN
DE
ES
FR
NL