Log in

TUYA IOT INTERFACE

TUYA IOT INTERFACE

19,90

In stock

TUYA IOT INTERFACE

In stock


SKU: WPI354 This product is a replacement of: VMA354 Check our full Whadda product transition list Category:
Free shipping
Free shipping from €50
EU shipping
EU shipping in 1 to 5 days
Belgian shop
Belgian shop
Return policy
14-day unmodified return policy

Description

Control your Arduino projects from anywhere in the world with a free app thanks to the Tuya IoT interface!

Plug the Tuya IoT interface module into your Arduino by using the included 4 male wires. Then connect your Arduino with the IoT Tuya cloud by simply installing the Tuyav library, which is compatible with ATmega chipsets (or AVR platforming). This will enable you to connect with the Tuya app over WiFi and lets you control up to 5 outputs.

Both the cloud and app are compatible with iOS® and Android®. It’s also nice to know that the Tuya app and cloud are completely free and there aren’t any sneaky subscriptions. Plus, the Tuya cloud is the largest in the world!

This product is a replacement of: VMA354

Features

  • Easy Integration: Effortlessly connect Arduino to the Tuya IoT cloud using the Tuya library.
  • No cost: There are no subscription fees associated with using the Tuya cloud or its corresponding app.
  • Compatibility: Works seamlessly with iOS and Android through the Tuya and Smart Life apps.
  • Made in Belgium : Whadda is a unique brand from Belgium’s Velleman Group that offers DIY projects for hobbyists or makers who want to immerse themselves in electronics, programming and mechanics.
  • STEM project: Develop and improve your STEM skills and acquire the knowledge, skills and experience needed to face the technological challenges of the future with this educational kit. This educational kit will trigger a number of processes such as problem-solving, investigative and creative thinking.

Specifications

  • Product basic info:
    • Primary colours: Green
    • Additional colours: Black, White
    • Weight unit: 35 g
  • Technical data:
    • Specifications kits & modules: Features <ul> <li>Compatible with 3.3v or 5v I/O Arduino Board</li> <li>SPI interface</li> <li>Frequency Band: 315, 433, 868 and 915 MHz (programmable)</li> <li>Suitable for LoRa network applications</li> <li>Low power consumption</li> <li>Built-in temperature sensor</li> <li>Built-in bit synchronizer performing clock recovery</li> <li>Incoming sync word recognition</li> <li>Automatic RF Sense and CAD with ultra-fast AFC</li> <li>Constant RF performance over voltage range of module</li></ul>
    • Specifications extra kits & modules: <ul><li>168 dB maximum link budget</li><li>+20 dBm 100 mW constant RF output</li><li>High sensitivity: down to -120 dBm at 1.2 kbps</li><li>High selectivity: 16-tap FIR channel filter</li><li>Low current: Rx = 16 mA, 100 nA register retention</li><li>Programmable Pout: -18 to +20 dBm in 1 dB step</li><li>FSK bit rates up to 300 kb/s</li><li>Fully integrated synthesizer with a resolution of 61 Hz</li><li>FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation</li><li>Packet engine with CRC-16, AES-128, 66-byte FIF</li><li>115 dB+ dynamic range RSSI</li></ul>
  • Operational properties:
    • Coding skill level: none
    • Electronics skill level: none
    • Mechanics skill level: none
    • Soldering skill level: none

Additional information

Weight35 g
Dimensions3,50 × 7,50 × 15,50 cm
Soldering

none

Electronics

none

Coding

none

Mechanics

none

Downloads

CE/UKCA/REACH Document EN
Go to Top