RGB DOT MATRIX BOARD & DRIVER BOARD BASED ON ATMEGA328

34,90

In stock

Description

This Arduino based (ATmega328P) RGB LED matrix driver platform based gains three 8+6-bit channels of hardware PWM control thanks to its LED driver. Its design allows you to easily change or write firmware using the Arduino IDE.

Features

  • 8 bits colours support with 6 bits correction for each colour in every dots
  • hardware 16 MHz PWM support
  • without any external circuits, play and shine
  • dedicated GPIO and ADC interface
  • hardware UART and IIC communication with easy cascading
  • 24 constant current channels of 100 mA each
  • 8 super source driver channels of 500 mA each
  • driver board is based on ATMEGA328 and works with IDE

Specifications

  • module dimensions: 60 x 60 x 16 mm
  • microprocessor: Atmega328P
  • indicator: PWR state
  • power supply: 5 to 7.5 VDC
  • cascade power connector: terminal blocks
  • program interface: UART/ISP (VMA440)
  • expansion socket: 100 mil bended pin header pair
  • communication protocols: UART/IIC
  • current consumption (except LED matrix): max. 40 mA
  • drive current (every channel): max. 500 mA
  • drive current ( every dot): max. 58 mA
  • circuit response time: 10 ns
  • RGB LED matrix colour resolution per dot: 16 M
  • UART baud rate: 9600 – 115200

Additional information

Weight56 g
Dimensions2.30 × 13.00 × 11.00 cm
Electronics

level 2

Soldering

none

Coding

level 3

Mechanics

level 1

Manuals

Manual

User manual
EN
EN

Online Manual

Downloads

Download

Colorduino Plasma EN

Info Sheets

VMA439 Scheme EN
2088 RGB Matrix EN

Options