Log in

ESP32 WEARABLE DEVELOPMENT BOARD

ESP32 WEARABLE DEVELOPMENT BOARD

24,90

In stock

ESP32 WEARABLE DEVELOPMENT BOARD

In stock


SKU: WMW101 This product is a replacement of: VMW101,VMA105 Check our full Whadda product transition list Category: Skills: ,
Free shipping
Free shipping from €50
EU shipping
EU shipping in 1 to 5 days
Belgian shop
Belgian shop
Return policy
14-day unmodified return policy

Description

Get ready to meet the most versatile wearable and ESP32 based development board of the moment! It’s 100% Arduino compatible and it’s easy and invisible to wear thanks to its uniquely thin PCB with 8 x sewable pads. Plus, it won’t sting you because the PCB design has no sharp edges. Also, 4 of the pads are capacitive touch-enabled.

As for the versatility; this little development board of 56 x 50 x 7.5 mm (2,2 x 1,97 x 2,95 inch) packs a lot of features such as a hall effect sensor, a temperature sensor and an ultra-low power analog pre-amplifier. But the neatest on-board feature is undoubtedly the ability to connect the board to WiFi and Bluetooth®. Getting any ideas? Here’s one: connect the board with our BirghtDot wearable LEDs collection and make them react to text or social messages, magnets, sounds, time, temperature and more!

You can easily connect this wearable with a battery thanks to the JST connector and you don’t have to worry about high power consumption because the board also features a deep sleep modus to keep its consumption to a minimum when you don’t need it. To top things off, this thin board is at least 10 times faster than an Arduino Uno because of its super high 240 MHz clock.

Go take a look at the BrightDot wearable LED boards and get creative!

Check out the following tutorials:
Make a BrightDot tie
Make a BrightDot twinkle beanie

This product is a replacement of: VMW101,VMA105

Features

  • on board WiFi and Bluetooth®
  • 8 x easy sewable pads:
    • 4 x regular power pads
    • 4 x capacitive touch-enabled pads
  • 1 x on-board orange LED
  • hall effect sensor
  • temperature sensor
  • ultra-low power analog pre-amplifier
  • integrated LiPo battery charger
  • dedicated reset button
  • 2 × 8-bit DACs
  • ultra-thin PCB
  • Arduino compatible
  • compatible with all BrightDot wearable LED boards
  • based on the ESP32
  • SPI, I²S, I²C and UART interfaces
  • the LED PWM, UART, I2C, I2S, and general purpose SPI functions can be configured to any GPIO
  • 12-bit SAR ADC
  • LED PWM (up to 16 channels)
  • deep sleep mode to lower power consumption when preferable

Specifications

  • Product basic info:
    • Instruction manual languages: English
    • Primary colours: Black
    • Depth unit: 3.8 cm
    • Height unit: 15.5 cm
    • Width unit: 7.8 cm
    • Weight unit: 50 g
  • Technical data:
    • Specifications kits & modules: <ul> <li>on board WiFi and Bluetooth®</li> <li>8 x easy sewable pads: <ul> <li>4 x regular power pads</li> <li>4 x capacitive touch-enabled pads</li> </ul> </li> <li>1 x on-board orange LED</li> <li>hall effect sensor</li> <li>temperature sensor</li> <li>ultra-low power analog pre-amplifier</li> <li>integrated LiPo battery charger</li> <li>dedicated reset button</li> <li>2 × 8-bit DACs</li> <li>ultra-thin PCB</li> <li>Arduino compatible</li> <li>compatible with all BrightDot wearable LED boards</li> <li>based on the ESP32</li> </ul>
    • Specifications extra kits & modules: <ul><li>SPI, I²S, I²C and UART interfaces</li><li>the LED PWM, UART, I2C, I2S, and general purpose SPI functions can be configured to any GPIO</li><li>12-bit SAR ADC</li><li>LED PWM (up to 16 channels)</li><li>deep sleep mode to lower power consumption when preferable</li></ul>
  • Operational properties:
    • Coding skill level: 3
    • Electronics skill level: 3
    • Mechanics skill level: none
    • Soldering skill level: none

Additional information

Weight50 g
Dimensions3,80 × 7,80 × 15,50 cm
Soldering

none

Electronics

level 3

Coding

level 3

Mechanics

none

Manuals

Online Manual

Click this line to view the Online Manual

Downloads

Infosheet EN
Overview of Velleman modules that are equal to D.I.Y Kits
This sheet is useful when you want to know which modules you could find in the do-it-yourself range of Velleman Kits and minikits.
EN
DE
ES
FR
NL

CE/UKCA/REACH document EN

Options

Go to Top