ARDUINO® MKR WIFI 1010

Description

The MKR WIFI 1010 is a significant improvement on the MKR 1000 WIFI. It’s equipped with an ESP32 module made by U-BLOX. This board aims to speed up and simplify the prototyping of WiFi based IoT applications thanks to the flexibility of the ESP32 module and its low power consumption.

Specifications

• Technical data:
  • UART: 1
  • Secure element: ATECC508
  • SPI: 1
  • SRAM: 32 kB
  • Supported battery: Li-Po Single Cell, 3.7V, 1024mAh Minimum
  • Microcontroller: SAMD21 Cortex®-M0+ 32bit low power ARM® MCU
  • PWM pins type: 1, 10, 12, 18/A3, 19/A4, 2, 3, 4, 5, 6, 7, 8
  • Radio module: u-blox NINA-W102
  • PWM pins: 13
  • External interrupts type: 1, 16/A1, 17/A2, 4, 5, 6, 7, 8, 9
  • Flash memory: 256 kB
  • I2C: 1
  • External interrupts: 10
  • DC current per i/o pins: 7 mA
  • Clock speed: 48 MHz
  • Clock speed RTC: 32768 kHz
  • Analog output pins type: DAC 10 bit
  • Built-in LED’s: 6
  • Analog input pins type: ADC 8/10/12 bit
  • Analog output pins: 1
  • Analog input pins: 7
  • Operating voltage: 3.3 V
• Connections:
  • Digital I/O pins: 8
• IT connections:
  • USB type: Full speed USB device and embedded host
• Power supply:
  • Input voltage rating: 5 V
• Product basic info:
  • Colour: Blue
  • Additional colour: Black
  • Depth: 25 mm
  • Weight: 32 g
  • Width: 61.5 mm
  • Material: Epoxy