Log in

1.75 mm (1/16″) PLA FILAMENT – MOSS GREY – MATT – 750 g

1.75 mm (1/16″) PLA FILAMENT – MOSS GREY – MATT – 750 g

27,95

In stock

1.75 mm (1/16″) PLA FILAMENT – MOSS GREY – MATT – 750 g

In stock


SKU: PLA175MG07M Check our full Whadda product transition list Category:
Free shipping
Free shipping from €50
EU shipping
EU shipping in 1 to 5 days
Belgian shop
Belgian shop
Return policy
14-day unmodified return policy

Description

The most popular 3D printing filament is now available in matt editions to print refined objects.

PLA is a super easy-to-use filament thanks to its low printing temperature in the range of 205°C. This famous filament can be used for detailed prints because of its quality, and your print will not deform after cooling due to its low shrinkage factor. PLA is also a tough material, therefore you can use it for sturdy prints too.

This esthetic material reflects less light, causing a matting finish. This effect also contributes to the quality of the 3D print, because the print lines are less noticeable and the surface is a little rougher.

PLA or poly lactic acid may sound extraterrestrial, but it is actually a biodegradable plastic that’s made from renewable natural resources. This ensures that there are no unpleasant smells during printing. What more could any maker want!

It’s compatible with all common desktop FDM and FFF technology 3D printers and you do not need a heated bed for good results. Check out all features and specs below!

Features

  • Eco-friendly: PLA is made from renewable and biodegradable resources.
  • Minimal odor: Melted PLA does not emit an unpleasant odor during the printing process.
  • Reinforced PLA: This modified PLA filament is stronger and less brittle than standard PLA.
  • Energy-efficient: Due to PLA’s lower melting point, less energy is consumed during the printing process.
  • Easy to print: Because of PLA’s properties, it is generally easier to print with, especially for beginners.
  • Good to know: The filament is compatible with all standard desktop FDM and FFF 3D printers and does not require a heated print bed.

Specifications

  • Product basic info:
    • Primary colours: Grey
    • Additional colours: Black
    • Diameter: 20 cm
    • Width unit: 5.5 cm
    • Weight unit: 750 g
    • Material: Polylactic acid (PLA)
  • Physical properties:
    • Number of pieces: 1
    • Filament diameter: 1.75 mm
  • Technical data:
    • Filament type: PLA matt
    • Impact strength per square meter: 7.5 kJ
    • Specific gravity: 1.24 g/cm³
  • Environmental data:
    • Biodegradable: Yes
  • Operational properties:
    • Printing temperature: 180-210 °C
  • Included:
    • Reel: Yes

Additional information

Weight1050 g
Dimensions6,00 × 21,20 × 20,40 cm
Soldering

none

Electronics

none

Coding

none

Mechanics

none

Go to Top